Відео

Thanks!

I need help, I have the same product, but I think I had some problem putting it together, because it has no power, the jet is very weak. Please, if you could support me, I really appreciate it.

Steve ! You saved me ! Your the MAN ! You posted this 10 years ago and today 11-21-23 I rebuilt my Geyser RGB and that ball - I used a Skateboard ball bearing on mine ! WooHoo ! Works great ! Thanks for sharing your knowledge.

I lost the bead in the garage.. but I found it again

This is STILL a useful video. Thanks for putting it up there. We've got several machines I'll be working on fixing this year. One of them has a replacement pump that's approximately 20W less rating and looks completely different though they're both the exact same fogger. I believe someone else tried to fix it once before, ha! And, about fog fragrance... if it's not built in to the fog fluid, don't add it. Those fragrance liquids are meant for things like "essential oil diffusers", not fog machines. Fog machines get much hotter than most of those fragrances were ever meant for..

I hope you actually see this comment because I can't begin to tell you how much I appreciated this video. The day before Halloween and you saved my graveyard scene! The video and instruction was fantastic. Truly appreciate all of the time and effort you put in for the sake of others. Thank again!

Thanks for the video!

Awesome! Just used this video to fix my Chauvet Arena Hazer 3. Basically the same set up. Thank you much!

worked perfectly, my fog machine (other brand) was clogged and works again now!

Thank you Thank you the brass fitting with the hole (orifice) was clogged

What light is that down smokee?

I lost the ball. Anyone know where to buy one

How can i order for a new pump

”This has helped me a lot.” " *gdkl.ionx.life* " ”Did it help you as well?” "3:23" 垃圾。 -Lord

I’ve done everything you said and my ADJ Vf1600 is still not working, any idea what else might be wrong with it?

High there! I enjoyed your video and it helped me a lot to fix my saecco gran crema espresso machine (in which the same ULKA pump is built in). In 3:53 you mention that the pump is done if you loose the little plastic ball on the cheque valve. During reassembly I lost this small ball and I was really angry, but I found a simple replacement; a pin needle with a round pinhead! It´s diameter fits, I even do not have to separate the pinhead from the needle, just inserted it into the valve seat. It works perfectly, (however I don´t know whether the plastic head of the needle is affected by the heat in the long run).

My mr fog tastes burnt but I’m not sure how to fix it

One last note, the inside of this machine is virtually identical to the VEI V-960 EL Capitan. With the exception the VEI has the constant output circuit board, instead of this one. Both are classic great performance models.

After taking it apart twice to clean and fix the pump, which didn't correct the buzzes but no fog problem. I decided to connect the pump directly to 120V. Worked like a champ, seems my units problem is the circuit to control the fog output volume is not driving the pump hard enough. More troubleshooting. Thank you for the teardown video.

You said soak it, but not in what ?

Very useful. Thank you.

Thanks! Took apart and when I unscrewed the ball assembly from the pump no liquid came through. When I got that little internal spring to come out then the liquid started dripping out. I reassembled and Holy Crap....it works like new. I was this close to throwing it out man. Your vid saved me a lot of cash.

Great video. What if the clog is in the metal tube leading from the pump to the heater?

Do all pumps have the glass bead? I can’t find one in mine.JEM Fogger brass high pressure industrial pump.

Just saved me $200 Thank you...WORKED....Had a machine stored for 2 years with fluid in it...thought it was shot...NOPE...works perfect now.

I just bought a chauvet 1200, its not shooting fog, its ‘working’ but not producing fog, it heats up and the pump is pumping juice because i disconnected the outlet pipe and tested it for a short moment and fluid came out although slowly. Could it be the heater is blocked by something?

Thank you! I followed your instructions and got that clogged fitting all cleaned out and now my machine works! And it was even a brand new one. Had been sitting in the box for 2 years. LOL

Gracias

Great video however mine still acts clogged. I will disassemble and soak. Question - could it be clogged in the hearing tubes? If so how would I clean that? Thanks in advance.

Thanks for posting this....just used it to fix my fog machine. :-)

Thanks for the video!

Verry beatufil 👍

Similar to steam mop micro pump repair as well

Thank you! just fixed my hurricane 1300 that was sitting for 4 years.

THANK YOU , THANK YOU. YOU SAVED HALLOWEEN AT OUR HOUSE !!!!!!!!

THANK YOU!! THANK YOU!!! THANK YOU!!!! This fogger has been sitting in my basement collecting dust for two years because I was SO PISSED OFF that it stopped working after two years. Your video made it easy for me to fix the problem. It worked. YOU ROCK!!! :-)

How do you fix the coils if they are bad?

Excellent and not yelling ; ) Question: When a fog machine is run dry,and the pump makes no noise, is it the coils (in this case inside the red plastic cylinder) that overheats? So that's why they say "the pump burnt out" it's because there's no liquid lubrication in the silver metal cylinder you took out that otherwise moves back & forth very fast with the springs. Therefore the coils are the part that overheats? Thanx!

i just found 2 of my dj1700s pumps rebuilt backwards ugh thanks for the vid man.

Awesome video very informative thank you very much. Just wished I had seen this video before I decided to buy a new one but I got my old one fixed so now I have two LOL 😂

your websites are down... I have a bunch of unused ones shop-s.top 420-se.xyz t-se.xyz hotti.top. vibrochat.club vibro-chat.com and others that forward like junk-fu.com g0pg.xyz and openInvent.club and bitsfit.com

I have the Chauvet hurricane Hazer Same issues I think Going to try and do this. Thanks for posting

7:25 In my case, inside the oring there was a plastic sleeve that ran away and therefore was loud, not pumping.This place must be a little tight to work properly.

My smoke machine was left in a humid place from October 31 of 2016 till today Tomorrow is halloween and my smoke machine was dispensing little puffs of smoke All I did was let it heat up for 5 min or so until I got it up and running perfectly I didn't take it apart or get any special materials just the smoke machine liquid (I have a VFI 1000 smoke machine) Best of luck and a happy Holloween to all

Thanks! Its working now :)

how to clean the heater ??? my fog machine heater blocked... so how to clean heater?

I was actually able to pull the little plastic piece from the end of the plunger and it is connected to a spring. So why do i have that which plugs the end of the plunger and a green plastic plug at the end of the spring on the other section. Yous was black, but mine is green. Bought mine last year 2016 so there are probably upgrades. Thanks.

Need help. It appears there is a green ball with the spring, but mine is made to where it cannot come out. I see on your at 4:28 there is no plug on the end of the metal plunger. Mine has what appears to be a plastic plug at the end of mine.Did my ball melt plugging the end of it? Thanks

Worked for me today. I needed it fix for tomorrow and it's fixed! BOOM!!!

hello good afternoon how are you I have a problem with the pump and is that the packaging was damaged the pump is the round metal I want to know which page you recommend me to buy these packages. I saw your video but I do not understand what you say since I do not speak English my language is Spanish if you can help me I would thank you very much